For the use of and by a qualified orthopaedic surgeon, in an operating room with adequate infrastructure. It is preferable that the surgeon is trained in the use of the specific instrumentation for the implantation of this device.
Simple Inventory & Manageable number of components
Four Cruciate retaining femoral components.
Four Posterior stabilised femoral components
Four Tibial metal backs
Four into four; sixteen UHMWPE inserts each for CR, and PS designs.
Time tested design
Based on the original Insall/ Freemsan/ Ranawat / Scott design.
Instrumentation based on Hungerford and Kenna pattern with special modifications by Dr L .Prakash
Precise instrumentation, giving reproducible results.
Just two small instrument boxes one for the cutting instruments, and the other for trials and impaction.
Instrumentation produces precise reproducible cuts every time Cruciate retaining and posterior stabilised knees on the same tibial platform. With an increasing resurgence of CR designs, this knee offers both type of inserts on the same tibial platform.
The same system has primary, and revision components with stems and wedges. Stemmed femoral components in left and right. Tibial stems of two sizes Tibial wedges and augments. Comprehensive hands on training provided.
Lara Orthopaedic Solution private limited NO : 29, Karuneegar street, Nerkundram, Chennai-600107. India. E-Mail : firstname.lastname@example.org
The Femoral component
Femoral components are eight in number, universal left and right. Four cruciate sparing,
and four cruciate sacrificing. These are the part names and numbers:
• Femoral component Extra Small CS
• Femoral component Small CS
• Femoral component Medium CS
• Femoral component Large CS
• Femoral component Extra Small CR
• Femoral component Small CR
• Femoral component Medium CR
• Femoral component Large CR
The Tibial component Tibial trays are available in four sizes, universal for left and right. These are the part names and numbers:
• Tibial tray Extra small
• Tibial tray Small
• Tibial tray Medium
• Tibial tray Large
The Poly insertsUHMWHDPE liners are available in forty sizes. These are the part names and numbers: